STANDARD FEATURES:
• Double conversion online topology with 0.9 power factor.
• Pure sine-wave output with less than 4% of THD.
• Energy-saving functions with high-efficiency mode, free-run mode, etc.
• Complete protections on short circuit, overload, surge and lighting, telecom ports, etc.
• Reliable design with Advance Battery Management and Adjustable Cooling System.
• Multiple communication and remote monitoring via RS-232, USB, SNMP, etc.
• Inverter IGBT technology with high frequency commutation.
• Large possibilities of settings to adapt to site needs.
• Low MTTR (<0.5h).
• Easy installation and maintenance with modular power module.
• Parallel-ready technology (up to 6 units).

INIFINITY EVO 3100 10 - 15 - 20kVA

3Ph(In) – 1Ph(Out)

Model

Infinity EVO 3100 10KVA

Infinity EVO 3100 15KVA

Infinity EVO 3100 20KVA

Nominal output power (0.9 PF)

10000VA

15000VA

20000VA

9000W

13500W

18000W

Input

Voltage (Vac)

400 (-20%/ + 15%) ; 380/415 selectable

Frequency (Hz)

50 - 60 (± 5%)

Power Factor

>0.99

Harmonic Distortion (THDi)

< 4%

Output

Voltage (Vac)

220 - 230 - 240 (selectable)

Frequency (Hz)

50 / 60

Harmonic Distortion (THDv)

< 2% for linear load, < 5% for non linear load

Phase

Single Phase

Waveform

Pure Sine Wave

Efficiency (DC : AC)

>95%

Protection

Overload Protection

UPS automatic power off if overload exceeds 125% for 10mins or >150% for 10 seconds

Short Circuit Protection

UPS output cut off immediately or protected by input fuse or circuit breaker

Alarm

Buzzer beeps under backup mode, battery fault and UPS fault.

Battery

Type

Internal / External

Typical recharge time

4 hours to 90%

Protection

Fuses

Standards

Marking

IEC EN 62040-2

Safety

IEC EN 62040-1

EMC

IEC EN 62040-2

Test and Performance

IEC EN 62040-3

Quality

ISO 9001:2008

General

Dimension (WxDxHmm)

450 x 670 x 1200

Product Weight (kg)

285

275

275

Display(LED)

Line mode (Green), Bypass/Battery mode (yellow), Fault (red)

Display (LCD)

Input/Output voltage and frequency, On-line mode, Backup mode, Battery capacity, Load level

Communication Interface

RS232/ USB / RS485 (Modbus) / RJ45 (SNMP)

Audible noise

< 52 db

Ambient Temperature (°C)

0 to 40

Storage Temperature (°C)

-10 to +70

Humidity

< 95, Non - Condensing

Subject to changes without notice
Astrid 3100 10KVA - 20KVA Rev01
OMD91030_Technical specification Infinity EVO 3100 10-20kVA
OM497010_Infinity_3100-3300 - User Manual
For further information, please kindly contact us
Tel: +84 4 3726 4905
Email: [email protected]

3Ph(In) – 1Ph(Out)

The Infinity EVO comes in version 3100 with single-phase output in ratings of 10-15-20 kVA.

It is the only model in our range that is transformerless and is the ideal solution for Data Centre and Telecom industry.

The design logic includes two 32 bit microprocessors that enable a very precise control system on all the equipment parameters, including those relevant to the continuous current that could spread the loads due to the no output transformer.

This line of product also has the plug and play parallel characteristic, thanks to a sophisticated algorithm developed by our R&D, the current sharing optimizes the efficiency, thereby reducing the operating costs.

Easy access to the Infinity EVO sub-systems makes the functional tests on site extremely fast and reduces the maintenance time (MTTR <0.5h).

This UPS has the characteristic of being compact in dimensions (only 45 cm wide): a small jewel of technology mounted on castors.