STANDARD FEATURES:
• Double conversion online topology with 0.9 power factor.
• Pure sine-wave output with less than 3% of THD.
• Energy-saving functions with high-efficiency mode, free-run mode, etc.
• Complete protections on short circuit, overload, surge and lighting, telecom ports, etc.
• Reliable design with Advance Battery Management and Adjustable Cooling System.
• Multiple communication and remote monitoring via RS-232, USB, SNMP, etc.
• Inverter IGBT technology with high frequency commutation.
• Output Isolating Transformer.
• Very robust thanks to steel cabinet, frame and supports.
• Large possibilities of settings to adapt to site needs.
• High MTBF (>150,000H).
• Parallel-ready technology (up to 6 units).

HYPERION EVO 200 - 250 - 300kVA

3Ph(In) – 3Ph(Out)

Model

Hyperion EVO 200KVA

Hyperion EVO 250KVA

Hyperion EVO 300KVA

Nominal output power (0.9 PF)

200KVA

250KVA

300KVA

180KW

225KW

270KW

Input

Voltage (Vac)

400 (-20%/ + 15%); 380/415 selectable

Frequency (Hz)

50 - 60 (± 5%)

Power Factor

>0.99

Harmonic Distortion (THDi)

< 3%

Output

Voltage (Vac)

380 - 400 - 415 (selectable)

Frequency (Hz)

50/ 60 (selectable)

Harmonic Distortion (THDv)

< 1% for linear load, < 5% for non-linear load

Phase

Three Phase

Waveform

Pure Sine Wave

Efficiency (DC : AC)

>96%

Protection

Overload Protection

UPS automatic power off if overload exceeds 125% for 10mins or >200% for 100 milliseconds

Short Circuit Protection

UPS output cut off immediately or protected by input fuse or circuit breaker

Alarm

Buzzer beeps under backup mode, battery fault and UPS fault.

Battery

Type

External only

Typical recharge time

8 hours to 90%

Protection

Wall mounted fuses switch box

Standards

Marking

IEC EN 62040-2

Safety

IEC EN 62040-1

EMC

IEC EN 62040-2

Test and Performance

IEC EN 62040-3

Quality

ISO 9001:2008

General

Dimension (WxDxHmm)

1220 x 895 x 1905

Product Weight (kg)

970

1090

1170

Display (LED)

Line mode (Green), Bypass/Battery mode (yellow), Fault (red)

Display (LCD)

Input/Output voltage and frequency, On-line mode, Backup mode, Battery capacity, Load level

Communication Interface

RS232/ USB/ RS485 (Modbus)/ RJ45 (SNMP)

Audible noise

< 62db

Ambient Temperature (°C)

0 to 40

Storage Temperature (°C)

-10 to +70

Humidity

< 95, Non-Condensing

Subject to changes without notice
Astrid Hyperion 200KVA - 300KVA Rev01
OMD36020 - Technical specification Hyperion EVO 200-250-300kVA
For further information, please kindly contact us
Tel: +84 4 3726 4905
Email: [email protected]

3Ph(In) – 3Ph(Out)

The small dimensions of the Hyperion 220-250-300 kVA are amazing, although an inverter output transformer to guarantee the galvanic separation between continuous and alternate line is included.

This feature makes handling easy with a consequent reduction of footprint space and installation costs.

The high frequency IGBT rectifier has optimised switching which results in a sinewave input independently from the available input waveform.

The input power factor, that is close to unity, makes the Hyperion the ideal solution to operate with Gen-sets, allowing a down sizing compared to past systems.

The Hyperion new cooling system that allows the UPS to be placed against the wall.

Front access to all the internal components, enables easy maintenance with low MTTR.

The high efficiency (> 94%) allows energy saving, installing or exchanging a UPS of old generation with a technologically advanced UPS such as the Hyperion allows immediate savings in terms of kw/h cooling ratings or to air conditioning of the room where the UPS is installed, considering the high power involved.