- Models for 24/48/60V battery strings.

- 26 voltage inputs.

- 8 sets of current inputs.

- 4 temperature inputs.

- Discharge logging.

- Periodic logging.

- Ease of installation.

- Compact design.

TECHNICAL DATA SHEET

“Battery Condition Monitor”

Voltage Resolution:0.01V
Voltage Accuracy:± 0.02V
Current Resolution:1.0A
Current Accuracy:± 2.0A
Temperature:± 2°C (standard sensor, upgraded sensor available for ± 1°C)
Typical Configurations:4 strings, 4 voltage measurements per string (requires 1x PCB)
e.g. 4x 48V strings using 4x 12V monoblocs per string, or
4x 24V strings using 4x 6V monoblocs per string
8 strings, 2 voltage measurements per string. (requires 1x PCB)
e.g. 8x 48V or 24V or 60V Strings using mid-point monitoring only.
1 string, 24 voltage measurements per string (requires 1x PCB)
e.g. 1x 48V string using 24x 2V monoblocs per string
2 strings, 12 voltage measurements per string (requires 1x PCB)
e.g. 2x 48V strings using 12x 4V monoblocs per string, or
2x 24V strings using 12x 2V monoblocs per string
4 strings, 5 voltage measurements per string (requires 1x PCB)
e.g. 4x 60V strings using 5x 12V monoblocs per string
8 strings, 4 voltage measurements per string (requires 2x PCBs)
e.g. 8x 48V strings using 4x 12V monoblocs per string, or
8x 24V strings using 4x 6V monoblocs per string
2 strings, 24 voltage measurements per string (requires 2x PCBs)
e.g. 2x 48V string using 24x 2V monoblocs per string
Communications:Enatel serial bus interface
Alarms:Controlled via SM35 or SM36
Voltage symmetry fault
(based on deviation from average string block measurement)
Battery current imbalance
(based on deviation from average string current across all strings in system)
Battery temperature high
Battery temperature low
Battery string open
(detects string voltage deviation from system DC bus to conclude battery is disconnected from system)
Data Logging:Utilization of supervisory module memory: 196,000 data points
Actual number of discharge events stored depends on frequency of discharges,
logging interval and parameters measured (see user manual for details)
Mechanical:
Dimensions, W, H, D:
Weight:
80.0mm, 145.0mm, 27.0mm
100g
Part Numbers:
ASM-ABM24-24:
ASM-ABM24-48:
ASM-ABM24-60:
Battery condition monitor for 24V battery strings
Battery condition monitor for 48V battery strings
Battery condition monitor for 60V battery strings

Due to product development specifications are subject to change without prior notice. Pictures are representative, actual products may differ.

For further information, please kindly contact us

Tel: +84 4 3726 4905

Email: [email protected]

The Enatel BCM consists of peripheral circuit boards that can be added to an Enatel system utilizing the SM31, SM32, SM35 or SM36 supervisory module to monitor the performance of the installed stand-by battery system.

The monitor is designed to be connected to a number of different battery configurations with minimal changes to its configuration.

The BCM includes the capability to log battery parameters during discharge and on a periodic time basis.